久久国产精品久久精品国产,领导扒开我奶罩吸我奶头视频,久久露脸国产精品ww

牌號	14MoV6-3
歐標鋼號	1.7715
對應標準	EN 10222-2-2017 壓力用途用鋼制鍛件第2部分具有高溫特性的鐵素體和馬氏體鋼 Steel Forgings for Pressure Purposes. Part 2:Ferritic and Martensitic Steels with Specified Elevated Temperature Properties
歸類	合金鋼

14MoV6-3 化學元素成分含量(%)

成分	C	Si	Mn	P	S	Cr	Mo	V	Al	Sn
最小值	0.1	-	0.4	-	-	0.3	0.5	0.22	-	-
最大值	0.18	0.4	0.7	0.025	0.01	0.6	0.7	0.28	0.02	0.025

碳當量計算

14MoV6-3 機械性能

厚度 t mm	抗拉強度 σ_b Mpa	屈服點 σ_s Mpa	斷后伸長率或延伸率 δ %	沖擊吸收能量 KV2 J
t≤500	460~610	≥300	I：≥20，tr/t：≥18	≥27

① I = longitudinal to main forging directions；tr = transverse to main forging directions；t = tangential.
② Maximum room temperature for the impact test is 20 °C. By option, impact testing may be carried out at 0°C, with the condition to fulfil the impact values as stated in this table.
③ Until the yield point criteria are harmonized in the various national codes, determination of ReH may be replaced by determination of Rp0.2. In this case Rp0.2 values are 10 MPa lower for ReH values up to 355 MPa and 15 MPa lower for ReH values greater than 355 MPa.

熱處理制度（僅供參考）

QT= quenched and tempered; NT= normalized and tempered. a = air; f = furnaced; o = oil; w = water or water based medium.

14MoV6-3 對應不同標準

1	EN 10222-2-2000 壓力用途用鋼制鍛件第2部分具有高溫特性的鐵素體和馬氏體鋼
	14MoV6-3 1.7715
2	EN 10222-2-2017 壓力用途用鋼制鍛件第2部分具有高溫特性的鐵素體和馬氏體鋼
	14MoV6-3 1.7715

注：數據僅供參考！如有疑問，請?zhí)顚?我要糾錯"！

噜噜高清欧美内射短视频,老色鬼久久亚洲av综合,久久久久亚洲av成人无码,精品日产卡一卡二卡麻豆 ,久久精品国产成人

熱處理制度（僅供參考）