會員中心 | English | 繁體中文

鋁帽鐵芯開口型沉頭抽芯鉚釘 ISO 15978 - 2002

選擇規格尺寸點擊↓

Φ2.4

Φ3

Φ3.2

Φ4

Φ4.8

Φ5

尺寸單位: mm

國際ISO 15978 - 2002 ISO15978 15978ISO 鋁帽鐵芯開口型沉頭抽芯鉚釘

掃一掃分享

單重計算公差

公稱直徑
d

Φ2.4

Φ3

Φ3.2

Φ4

Φ4.8

Φ5

d	最大值
	最小值
d_k	最大值
	最小值
k	最大值
d₁	最大值
L₁	最小值
b	最大值
剪切載荷/N(min)-L級
剪切載荷/N(min)-H級
拉力載荷/N(min)-L級
拉力載荷/N(min)-H級
釘芯斷裂載荷/N(max)
釘頭保持試驗載荷/N

2.48	3.08	3.28	4.08	4.88	5.08
2.25	2.85	3.05	3.85	4.65	4.85
5.0	6.3	6.7	8.4	10.1	10.5
4.2	5.4	5.8	6.9	8.3	8.7
1	1.3	1.3	1.7	2	2.1
1.55	2	2	2.45	2.95	2.95
25	25	25	27	27	27
L(max)+3.5	L(max)+3.5	L(max)+4	L(max)+4	L(max)+4.5	L(max)+4.5
250	400	500	850	1200	1400
350	550	750	1250	1850	2150
350	550	700	1200	1700	2000
550	850	1100	1800	2600	3100
2000	3000	3500	5000	6500	6500
10	15	15	20	25	25

推薦的鉚接范圍

①,材料：鋁合金（AlA）及鋼(St)為鉚釘主體和釘芯材料, 并應具有第5條規定的機械性能（見原件表3）。材料規格由制造商決定。

替代列表

暫無

等效標準

國標 GB	國際 ISO	德標 DIN
GB /T 12617.1 修改采用 ISO 15978:2002	ISO 15978	DIN EN ISO 15978

以上有部分標準可能為近似等效，如有異議以標準原件為準

工藝相關

ISO 3269

緊固件驗收檢查

技術條件和引用標準

材料
Mandrel push-out resistance
表面處理
表面缺陷
驗收及包裝

Blind rivets in accordance with this International Standard shall have a rivet body made of of aluminium alloy (AlA) and a mandrel made of steel (St).
Material specification is at the discretion of the manufacturer.

The load to push out the mandrel shall exceed 10 N when tested in accordance with ISO 14589.

The surface of the rivet body shall be plain, i.e. in natural finish. The surface finish of the mandrel is at the discretion of the manufacturer and may be oil, phosphate and oil or zinc coating.

Rivets shall be free from burrs and harmful defects and shall have well formed heads and shanks.
After setting, rivets shall not show evidence of cracking when viewed at 5× magnification.

ISO 3269

引用參考

GB /T 1172

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

注：技術數據僅供參考，請以官方原件為準！

告訴我在“易緊通”看到，將給您優惠

寧波超鑫鉚釘制造有限公司

聯系人：吳鐵洲移動電話： 15906744333 電話：0574-63313978

材料：銅、鋁、鐵、不銹鋼；規格：齊全；表面處理：按照客戶的要求

[詢價]

慈溪市釘晟緊固件有限公司

聯系人：勵晨瑩/勵家豪點擊這里給我發消息

469369214 移動電話： 15158363879/18258728198 電話：15158363879/18258728198 微信號：15158363879/18258728198

材質：不銹鋼，全鐵，鋁等；規格尺寸齊全；表面處理可根據客戶需求，現貨充足。

[詢價]

上海承泰金屬五金制造有限公司

聯系人：諸葛鴻滿 點擊這里給我發消息

2880137050 點擊這里給我發消息

2880137059 移動電話： 18916049888 電話：021-59742477/59740118

材質：不銹鋼、鋁、碳鋼；規格：齊全；表面處理：根據客戶要求

[詢價]

類似標準及供貨信息

1	[國標] GB /T 12617.1 - 2006	開口型沉頭抽芯鉚釘 10、11級 （鋁釘，鋼芯） Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 10、11 供應商(6)
2	[國標] GB /T 12617.2 - 2006	開口型沉頭抽芯鉚釘 30級 （鋼釘，鋼芯） Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 30 供應商(5)
3	[國標] GB /T 12617.3 - 2006	開口型沉頭抽芯鉚釘 12級 （鋁釘，鋁芯） Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 12 供應商(5)
4	[國標] GB /T 12617.4 - 2006	開口型沉頭抽芯鉚釘 51級 （不銹鋼釘，不銹鋼芯） Open End Blind Rivets with Break Pull Mandrel and Countersunk Head-Property Class 51 供應商(6)
5	[國標] GB /T 12617.5 - 2006	開口型沉頭抽芯鉚釘 20、21、22級 （銅釘，鋼、青銅或不銹鋼芯） Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 20,21,22 供應商(5)
6	[國標] GB 12617 - 1990	開口型沉頭抽芯鉚釘 120 Deg Flush Head Break Mandrel Blind Rivets 供應商(5)
7	[美標] IFI 117 - 2003	輕型開口沉頭抽芯鉚釘 100 Deg Countersunk Head Pull Through Mandrel Blind Rivets 供應商(1)
8	[美標] IFI 505 - 1999	米制開口型沉頭抽芯鉚釘 Metric Flat Countersunk Break Mandrel Blind Rivets 供應商(1)
9	[美標] IFI 520 - 1999	米制開口沉頭抽芯鉚釘 Metric 100 Deg Flush Head or Countersunk Head Pull Through Mandrel Blind Rivets 供應商(1)
10	[美標] IFI 551 - 1999	米制結構型100°或120°開口沉頭抽芯鉚釘 Metric 100 and 120 Deg Flush Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets 供應商(1)
11	[美標] IFI 114 (T3) - 2003	100°或120°開口型沉頭抽芯鉚釘 100 Deg and 120 Deg Countersunk Head Style Break Mandrel Blind Rivets
12	[美標] IFI 114 (T3) - 1986	100°或120°開口型沉頭抽芯鉚釘 [Table 3] 100 Deg and 120 Deg Flust Head Style Break Mandrel Blind Rivets [Table 3]
13	[德標] DIN 7337 (B) - 1991	開口型沉頭抽芯鉚釘 Break Manderl Blind Rivets, Countersunk Head 供應商(3)
14	[國際] ISO 15980 - 2002	鐵帽鐵芯開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - St/St 供應商(4)
15	[國際] ISO 15982 - 2002	鋁帽鋁芯開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/AIA 供應商(3)
16	[國際] ISO 15984 - 2002	全不銹鋼開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - A2/A2 供應商(4)
17	[國際] ISO 16583 - 2002	開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Cu/St or Cu/Br or Cu/SSt 供應商(2)
18	[汽標代號] Q 441	開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head 供應商(3)
19	[汽標代號] Q 441B (T19)	開口型沉頭抽芯鉚釘 30級 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 30 供應商(3)
20	[汽標代號] Q 441B	開口型沉頭抽芯鉚釘 10、11級 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head-Property Class 10、11 供應商(3)
21	[美標] ASME/ANSI B 18.30.1M - 2000 (R2005)	米制100°和120°開口型沉頭抽芯鉚釘 100° and 120° Countersunk Head Style Break Mandrel Blind Rivets (Metric series)
22	[意大利] UNI 9200 (B) - 1994	開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head 供應商(1)
23	[法國] NF E 25-721 - 2003	全不銹鋼開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - A2/A2 供應商(1)
24	[法國] NF E 25-715 - 2003	鋁帽鐵芯開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/St
25	[法國] NF E 25-717 - 2003	鐵帽鐵芯開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - St/St
26	[法國] NF E 25-719 - 2003	鋁帽鋁芯開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/AIA
27	[法國] NF E 25-723 - 2003	銅帽鐵芯開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Cu/St or Cu/Br or Cu/SSt
28	[企標] YJT 8038	開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head
29	[德標] DIN EN 6128 - 2018	盲螺栓，100°平頭，高強度 Blind Bolt, 100° Flush Head, High Strength
30	[德標] DIN EN ISO 15978 - 2003	開口型沉頭抽芯鉚釘—鋁帽鐵芯 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/St 供應商(3)
31	[德標] DIN EN ISO 15980 - 2003	鐵帽鐵芯開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - St/St 供應商(3)
32	[德標] DIN EN ISO 15982 - 2003	鋁帽鋁芯開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/AIA 供應商(3)
33	[德標] DIN EN ISO 15984 - 2003	全不銹鋼開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - A2/A2 供應商(3)
34	[德標] DIN EN ISO 16583 - 2003	開口型沉頭抽芯鉚釘 Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Cu/St or Cu/Br or Cu/SSt 供應商(3)

噜噜高清欧美内射短视频,老色鬼久久亚洲av综合,久久久久亚洲av成人无码,精品日产卡一卡二卡麻豆 ,久久精品国产成人

鋁帽鐵芯開口型沉頭抽芯鉚釘 ISO 15978 - 2002

工藝相關

技術條件和引用標準

引用參考