米制六角頭全螺紋螺釘 NAS NAM 51474 (DS 51474) - 2011
| 選擇規格尺寸 點擊↓ M3 ×0.5 M4 ×0.7 M5 ×0.8 M6 ×1 M8 ×1.25 M10 ×1.5 M10 ×1.5 M12 ×1.75 M16 ×2 M20 ×2.5 M24 ×3 M30 ×3.5 M36 ×4 |
尺寸單位:
mm |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
| ①,螺紋：標準粗牙螺距公差等級 6g，符合 FED-STD-H28/21。 螺紋的可接受性應符合 FED-STD-H28/20 system 21。 ②,3 和 4 毫米直徑的螺釘不應有鎖線孔。 “h”尺寸應為“k”尺寸的 1/2。 指定時，鉆頭孔如下： 對于 5 毫米直徑 - 在六邊形平面中心 0.3 毫米范圍內鉆三個 90° X 1 毫米最小直徑的沉頭孔。 對于 6 和 8 毫米直徑 - 在六角平面中心 0.3 毫米處鉆三個沉孔，90° X 1.4 毫米最小直徑。 對于 10 毫米和更大的直徑 - 在 0.3 毫米的六角平面中心內鉆三個 90° X 1.6 毫米最小直徑的沉頭孔。 ③,尺寸和公差符合 ANSI Y14.5M-1982。 ④,此尺寸不是 ISO 標準，除非特別訂購寬度為 15 mm 的 M10 螺釘，否則應提供寬度為 16 mm 的 M10 螺釘。 |
類似標準及供貨信息
| 1 |
|
[國標] GB /T 32.1 - 2020 |
六角頭頭部帶孔螺栓 Hexagon Bolts with Wire Holes On Head 供應商(7) |
| 2 |
|
[國標] GB /T 32.3 - 2020 |
六角頭頭部帶孔螺栓 細牙 Hexagon Bolts with Wire Holes On Head - Fine Pitch Thread 供應商(1) |
| 3 |
|
[國標] GB 32.1 - 1988 |
六角頭頭部帶孔螺栓 A和B級 Hexagon Bolts with Wire Hole on Head - Product Grade A and B 供應商(7) |
| 4 |
|
[國標] GB 32.2 - 1988 |
細桿 B級 六角頭頭部帶孔螺栓 Hexagon Bolts with Wire Holes on Head - Reduced Shank - Product Grade B 供應商(1) |
| 5 |
|
[國標] GB 32.3 - 1988 |
六角頭頭部帶孔螺栓 細牙 A和B級 Hexagon Bolts with Wire Holes on Head - Fine Pitch Thread - Product Grade A and B 供應商(1) |
| 6 |
|
[國標] GB 25 - 1976 |
小六角頭部帶孔螺栓 Bolts, Small Hexagon Head With Holes Through The Head 供應商(1) |
| 7 |
|
[國標] GB 26 - 1976 |
小六角頭頭部帶孔導頸螺栓 Bolts, Small Hexagon Head with Fit Neck and Holes Through The Head |
| 8 |
|
[汽標代號] Q 170 |
六角頭頭部帶孔螺栓 Hexagon Bolts with Wire Holes On Head |
| 9 |
|
[汽標代號] Q 170B |
六角頭頭部帶孔螺栓 [粗牙普通螺紋] Hexagon Bolts with Wire Hole on Head |
| 10 |
|
[汽標代號] Q 171 |
細牙六角頭頭部帶孔螺栓 Hexagon Bolts with Wire Holes On Head |
| 11 |
|
[汽標代號] Q 171B |
六角頭頭部帶孔螺栓 [細牙普通螺紋] Hexagon Bolts with Wire Hole on Head |
| 12 |
|
[汽標代號] Q 171C |
六角頭頭部帶孔螺栓 [較細牙普通螺紋] Hexagon Bolts with Wire Hole on Head |
| 13 |
|
[歐標] EN 2887 - 1995 |
航空航天 - 六角頭螺栓 全螺紋 耐腐蝕鋼 鈍化 級別：600MPa (環境溫度)/425℃ Aerospace Series - Bolts, Normal Hexagonal Head, Threaded to Head, In Corrosion Resisting Steel, Passivated - Classification: 600 Mpa (At Ambient Temperature) / 425 ℃ |
| 14 |
|
[鐵道部] TB /T 1479 - 1991 |
軌道車輛車軸軸端螺栓 |
| 15 |
|
[俄標] GOST 7796 (-3) - 1970 |
頭部帶孔六角頭螺栓 3型 Hexagon Reduced Head Bolts Product Grade B, Type 3 |
| 16 |
|
[俄標] GOST 7798 - 1970 |
六角頭頭部帶孔螺栓 Hexagon Bolts with Wire Holes on Head |
| 17 |
|
[俄標] GOST 7805 (-3) - 1970 |
六角頭頭部帶孔螺栓 3型 Hexagon Bolts with Wire Holes on Head, Product Grade A, Type 3 |
| 18 |
|
[航天] QJ 2365 - 1992 |
六角頭頭部帶孔螺栓 Hexagon Head Bolts with Hole |
| 19 |
|
[中國兵器工業總公司部標準] WJ 2215 - 1994 |
六角頭頭部帶孔全螺紋螺栓 Hexagon Bolts with Wire Holes on Head - Full Thread |